 |
To handle power boats and shoal draft sailboats to 34 feet |
 |
Overall trailer length of 32 feet |
 |
Overall trailer width of 9 feet |
 |
Capacity of 20,000 lbs. in the yard |
 |
6" x 8" x 3/8" steel tube main frame |
 |
Hydraulics |
 |
Two rear hydraulic arms with offset reversible pads |
 |
Hydraulic raising and lowering of frame (each side) |
 |
Hydraulic front end for fore and aft lifting/leveling |
 |
Manual hydraulic control valves |
 |
12VDC electric hydraulic power unit |
 |
Pilot-operated double-locking valves on all cylinders |
 |
Hydraulic walking beam suspension (frame can be lowered to
ground) |
 |
Height adjustable rolling forward cross beam with V-pad |
 |
Ratchet adjustable swing-out rear cross beam with
removable booster block |
 |
One Dexter Heavy-Duty Series 25,000 lb. idler stub axle |
 |
Two 28 x 12.5 x 15 low profile high flotation industrial
yard tires |
 |
Hydraulically operated pintle ring draw bar |
 |
Two screw pad stabilizers w/sockets and T-pins, mountable
to frame |
 |
Two "Big Foot" parking stands |
 |
Expanded metal basket at trailer front |
 |
Power connections to tow vehicle |
 |
Finish: Frame sandblasted to white steel; finished with
two coats high-build epoxy primer with hardener, three coats high
performance acrylic urethane with hardener choice of color |
 | Galvanized frame, arms, cross beams |
 | Galvanized arms, cross beams, parking stands |
 | Remote control w/pendant operation |
 | Wireless remote operation |
 | Pivoting rear hydraulic arms |
 | Forward hydraulic arms, extendable |
 | Drop rolling dolly for sailboat keels |
 | Stainless steel pivots, T-pins, hardware |
 | Frame extended 1 foot |
 | 150 amp battery charger, mounted (in lieu tow vehicle connect.) |
 | Electric planetary winch on telescoping mast mount |
 | Extra stabilizers with sockets/T-pins (set of 2) |
 | Backup lights and inside frame lights |
 | Solid tires in lieu of pneumatic tires |