 | To handle power boats and shoal draft sailboats to 41 feet |
| Overall trailer length of 38 feet |
| Overall trailer width of 9 feet (wider or narrower as desired) |
| Capacity of 40,000 lbs. in the yard |
| 8" x 8" x 3/8" steel square tube main frame |
| Hydraulics
 | Two pivoting rear hydraulic arms with extendable pads |
| Two forward extendable hydraulic arms |
| Hydraulic front end for fore and aft leveling/lifting |
| Hydraulic raising and lowering of frame (each side) |
| Manual hydraulic control valves |
| 12VDC electric hydraulic power unit |
| Pilot operated double-locking valves on all cylinders |
| Outboard hydraulic walking beam suspension |
|
| Two movable and adjustable forward cross beams |
| Ratchet-adjustable two-position swing-out rear cross beam |
| Four low profile high flotation 28 x 12.5 x 15 industrial yard tires |
| Two screw pad stabilizers with sockets and T-pins, mountable on inside
and outside of frame |
| Front mast with hydraulically operated pintle ring draw bar |
| Expanded metal basket at trailer front |
| Two parking stands |
| Power connection to tow vehicle |
| Finish: Frame sandblasted to white steel; finished with two coats
high-build epoxy primer with hardener, three coats high performance
acrylic urethane with hardener - choice of color |
| Hydraulically operated forward landing wheels |
| Galvanized frame, arms, cross beams |
| Remote control w/pendant operation |
| Wireless remote operation in lieu of pendant |
| Gooseneck (fixed) for fifth wheel operation |
| Hydraulically articulating gooseneck for fifth wheel operation |
| Two drop beams for sailboat keels |
| Stainless steel pivots, T-pins, hardware |
| Pressure-treated wood bunks, carpeted, on main rails |
| Frame extended 1 foot |
| 150 amp battery charger, mounted (in lieu tow vehicle connect.) |
| Electric planetary gear winch on telescoping mast mound |
| Solid tires in lieu of pneumatic tires |
