To handle power boats to 52 feet, sailboats to 58 feet

Overall trailer length of 45 feet (shorter if desired)

Overall trailer width of 10 feet (narrower/wider if desired)

Yard capacity of 60,000 lbs.

12" x 12" x 3/8" steel square tube one-piece welded main frame

Frame sealed, pressure tested for air tightness to prevent corrosion

Hydraulics:

	Four hydraulic arms, fully adjustable, extendable to 8' draft, choice of forward-facing or aft-facing rear arms
	Hydraulic raising and lowering each side of main frame
	Pilot operated double-locking valves on all cylinders
	Manual hydraulic control valves
	12 VDC electric hydraulic power unit

12VDC deep cycle marine battery

Battery charger (or power connections to tow vehicle)

Four slide-through removable cross beams

Cross beam pockets through frame

Strap hangers with straps for sailboat keels

Outboard walking beam (hydraulic) suspension (frame lowers to ground)

Tandem Dexter Heavy-Duty Series 30,000 lb. axles

Four low profile high flotation 32 x 12.1 x 15 industrial yard tires

Pintle ring for connection to forklift, front loader or farm tractor

Expanded metal basket at front of trailer

Two parking stands

For submersible use: hydraulic landing wheels, front mast w/hydraulic cylinder to draw bar, solenoid-actuated remote control with hand-held box and walk-around cable, watertight housing of solenoids and electrical connections

Additional pair hydraulic arms

Reversible rear hydraulic arms

Gooseneck (fixed) for fifth wheel operation

Gooseneck (hydraulically articulating) for fifth wheel operation

Galvanized arms (4) and parking stands only

Stainless steel pivot pins, T-pins, hardware

Reinforced aluminum cross beams each

Hydraulic front end parking jack

Hydraulically operated front end draw bar

Solid tires in lieu of pneumatic tires