 | To handle power boats to 62 feet, sailboats to 70 feet |
| Overall trailer length of 53 feet (shorter/longer if desired) |
| Overall trailer width of 11 feet |
| Yard capacity of 110,000 pounds |
| 16" x 8" x 1/2" structural rectangular steel tubing main frame,
reinforced with 15" x 40 lb. channel Frame sealed, pressure tested for air
tightness to prevent corrosion |
| Compact gooseneck front end or pintle ring connection |
| Hydraulics:
 | Six fully adjustable hydraulic arms to handle up to 8' draft;
canting forward arms, forward-facing or aft-facing rear arms |
| Hydraulic raising and lowering each side of main frame |
| Hydraulic parking jack for front end lift |
| Remote control of all hydraulic functions |
| Hand-held control box with walk-around cable |
| 24VDC electric hydraulic power unit |
| Pilot operated double-locking valves on all cylinders |
|
| Two 4-DM deep cycle marine batteries 110 volt battery charger (or
power connections to tow vehicle |
| Six slide-through removable cross beams |
| Two-level through-frame pockets for keel-supporting cross members
Strap hangers with straps for sailboat keels |
| Outboard hydraulic walking beam suspension; frame can be lowered to
ground |
| Eight low profile/high flotation 32 x 12.1 x 15 industrial yard tires
|
| Expanded metal basket at frame front |
| Finish: Entire unit sandblasted to white steel; finished with two
coats high-build epoxy primer with hardener, three coats high performance
acrylic urethane with hardener (choice of color)
|
