 |
To handle power boats to 75 feet, sailboats to 85 feet |
|
Overall trailer length of 65 feet (shorter/longer if
desired) |
|
Overall trailer width of 11 feet 8 inches |
|
Yard capacity of 140,000 pounds |
|
16" x 12" x 5/8" structural rectangular steel tubing main
frame, reinforced with 15" x 40 lb. channel |
|
Compact gooseneck front end |
|
Frame sealed, pressure tested for air tightness to prevent
corrosion |
|
Hydraulics:
 |
Six fully adjustable hydraulic arms to handle up to 9'
draft; canting forward arms, forward-facing or aft-facing rear arms |
|
Hydraulic raising and lowering of each side of main
frame |
|
Hydraulic parking jack for front end lift |
|
Remote control of all hydraulic functions |
|
Hand-held watertight control box with walk-around cable |
|
24VDC electric hydraulic power unit |
|
Pilot operated double-locking valves on all cylinders |
|
|
Two 4-DM deep cycle marine batteries |
|
110 volt battery charger (or power connection to tow
vehicle) |
|
Eight slide-through removable cross beams |
|
Two-level through-frame pockets for keel-supporting cross
members |
|
Strap hangers with straps for sailboat keels |
|
Outboard hydraulic walking beam suspension; frame can be
lowered to ground |
|
Tandem axles with four Dexter 35,000 pound reinforced
axles |
|
Eight low profile high flotation 32x12.1x15 yard tires (24
ply) |
|
Expanded metal basket at frame front |
|
Finish: Entire unit sandblasted to white steel; finished
with two coats high-build epoxy primer with hardener, three coats high
performance acrylic urethane with hardener (choice of color) |
