 | To handle power boats to 65 feet, sailboats to 70 feet |
| Overall length of 50 feet (longer or shorter if desired) |
| Overall bed length of 41 feet +/- |
| Overall width of 9 feet 6 inches +/- |
| Capacity of 90,000 pounds |
| Main frame: Solid welded one-piece ladder frame construction of
structural steel tubing and structural channel steel |
| Power plant:
 | John Deere industrial diesel engine (or equivalent) with complete
instrumentation and full enclosure |
| Four two-speed hydraulic drive units with brakes at rear |
| Two hydraulic drive/steering motors at front |
| Hydraulic drive pump with hydrostatic variable displacement
transmission |
| Operator's station with joystick controls |
|
| Hydraulics:
| Six fully adjustable hydraulic arms to handle up to 8' draft;
canting forward arms; aft-facing or forward-facing rear arms |
| Hydraulic walking beam suspension to lift/lower frame each side |
| Pilot-operated double-locking valves on all cylinders |
| Solenoid-actuated remote control with pendant operation |
|
| Six high flotation/low profile heavy lug industrial yard tires |
| Six galvanized steel slide-through keel-supporting cross beams |
| Stainless steel T-pins and hardware |
| Finish: Entire unit sandblasted to white steel; professionally
finished with two coats high-build epoxy primer with hardener, three coats
high performance acrylic urethane
with hardener - choice of color |
| Galvanized arms, arm extensions, pad brackets, cross beams |
|
Reinforced aluminum cross beams in lieu of
steel beams each |
|
Stainless steel hydraulic cylinder piston rods
(arms) |
|
Stainless steel hose ends and fittings |
|
Solid tires in lieu of pneumatic tires |
|
Welded strap hangers and straps for sailboat
keels |
|
Submersible use: Raised operator’s station
platform for above-water operation, stainless steel piston rods, hose ends
and fittings,
welded strap hangers and straps for sailboat keels, solid tires |
