 | To handle power boats to 65 feet, sailboats to 70 feet |
| Overall length of 53 to 56 feet (longer/shorter if desired) |
| Overall bed length of 46 feet +/- |
| Overall width of 10 feet +/- |
| Capacity of 120,000 pounds at 12% grade, with load on all 6 cross beams |
| Main frame: Solid welded one-piece ladder frame construction |
| Power plant:
 | John Deere industrial diesel engine (or equivalent) with complete instrumentation and full enclosure |
| Six two-speed hydraulic drive units with brakes (all wheels) |
| Hydraulic drive pump with hydrostatic variable displacement transmission |
|
| Hydraulics:
| Six fully adjustable hydraulic arms to handle up to 8' draft; canting forward arms; aft-facing or forward-facing rear arms |
| Hydraulic walking beam suspension to lift/lower frame each side |
| Pilot-operated double-locking valves on all hydraulic cylinders |
| Solenoid actuated hydraulic remote control with pendant operation |
|
| Six high flotation 32x12.1x15 solid heavy-lug industrial yard tires |
| Six galvanized steel slide-through keel-supporting cross beams |
| Stainless steel T-pins and hardware |
| Finish: Entire unit sandblasted to white steel; professionally finished with two coats high-build epoxy primer with hardener, three coats high performance acrylic urethane with hardener - choice of color |
| Galvanized hydraulic arms, arm inserts and pad brackets |
