 |
To handle power boats to 65 feet, sailboats to 70 feet |
|
Overall length of 53 to 56 feet (longer/shorter if
desired) |
|
Overall bed length of 46 feet +/- |
|
Overall width of 10 feet +/- |
|
Capacity of 120,000 pounds at 12% grade, with load on all
6 cross beams |
|
Main frame: Solid welded one-piece ladder frame
construction |
|
Power plant:
 |
John Deere industrial diesel engine (or equivalent) with
complete instrumentation and full enclosure |
|
Six two-speed hydraulic drive units with brakes (all
wheels) |
|
Hydraulic drive pump with hydrostatic variable
displacement transmission |
|
Raised operator's station with joystick controls |
|
|
Hydraulics:
|
Six fully adjustable hydraulic arms to handle up to 8'
draft; canting forward arms; aft-facing or forward-facing rear arms |
|
Hydraulic walking beam suspension to lift/lower frame
each side |
|
Pilot-operated double-locking valves on all hydraulic
cylinders |
|
Solenoid actuated hydraulic remote control with pendant
operation |
|
|
Six high flotation 32x12.1x15 solid heavy-lug industrial
yard tires |
|
Six galvanized steel slide-through keel-supporting cross
beams |
|
Stainless steel T-pins and hardware |
|
Finish: Entire unit sandblasted to white steel;
professionally finished with two coats high-build epoxy primer with
hardener, three coats high performance acrylic urethane with hardener -
choice of color |
|
Galvanized hydraulic arms, arm inserts and pad brackets |
